620-1423 Seymour MRO Industrial High-Solids Spray Paint, Safety Red (16 oz)
Product Line: MRO SKU: 620-1423DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
- Extremely Durable, Industrial-Grade High-Solids spray paint, for all your projects when conventional spray paint just wont cut it
- Won't run or sag and resists oil, gas, heat, abrasion and sunlight
- High-Solids formulation for twice the coverage of conventional spray paints
- Dries to touch in 30 min. Hard Cure 2-3 days.
- Up to 18 sq ft coverage per can
UPC: | 043281006774 |
Part #: | 0006201423 |
Container Size: | 20 OZ |
Net Fill Wt. OZ: | 16 |
Net Fill Wt. G: | 454 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
(0) (0)
Question
chaz –
620-1446 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
(0) (0)
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
(0) (0)
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
(0) (0)
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
(0) (0)
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
(0) (0)
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
(0) (0)
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. Iâd recommend our Spruce primers.
(0) (0)
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
(0) (0)
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
(0) (0)
Question
Tammy –
Will this paint adhere to plastic and rubber?
(0) (0)
Answer
Seymour Paint –
It will not adhere to rubber as itâs too flexible. As for plastic, it will adhere to only the hard typesâ¦.and ideally the plastic is sanded and primed first.
(0) (0)
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
(0) (0)
Answer
Seymour Paint –
Omaha orange would be the best match.
(0) (0)
Question
Martin –
Can i use it on plastic, no primer?
(0) (0)
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
(0) (0)
Question
Jim Pearson –
Do you have 620-1443 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
(0) (0)
Question
Josh Padilla –
Can this product impact a cathodic protection system?
(0) (0)
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
(0) (0)
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
(0) (0)
Answer
Seymour Paint –
620-1433 has a flat finish.
(0) (0)
Question
Brad –
can it be used in very wet areas?
(0) (0)
Answer
Seymour Paint –
Yes. It just canât withstand continuous immersion in water.
(0) (0)
Question
Steve Stanley –
Is this a gloss paint? Is it available in flat or satin? I’m looking for a gray enamel with a sheen similar to the Seymour Cast Blast.
(0) (0)
Answer
Seymour Paint –
It is high gloss. You could try the charcoal color in our roof paint line (#16-1703). It has a flat finish.
(0) (0)
Question
chris osvalds –
are replacement nozzels available for the MRO spray paints?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service regarding B-13 nozzles.
(0) (0)
Question
CHARLES FURNARI –
Are your paints work with rust-oleum enamel?
(0) (0)
Answer
Seymour Paint –
Yes. Assuming the Rustoleum paint is fully cured, you can topcoat with the MRO and not have to worry about an adverse reaction.
(0) (0)
Question
Pat Oates –
What High Solids Paint matches closely to Kubota Orange?
(0) (0)
Answer
Seymour Paint –
Because itâs more of a reddish orange, our EN-48 or 620-1432 would be a good match.
(0) (0)
Question
David Barnette –
I am trying to find a color that Duke energy has on the pad mount green and it is a seymour product. can you help me ?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not carry however we can custom match. Please contact sales@seymourpaint.com for order minimums and pricing.
(0) (0)
Question
Pat Oates –
Which orange color matches Kubota
(0) (0)
Answer
Seymour Paint –
We donât have a color called Kubota orange, but 98-48 chevy orange is very close.
(0) (0)
Question
Holly Ramirez –
Can 620-1433 be used repaint inside the firebox?
(0) (0)
Answer
Seymour Paint –
It has a heat resistance of 300F continuously. If you donât feel that it would withstand that temperature, you could opt for #16-1203 black which goes up to 1200F.
(0) (0)
Question
Brian Coulston –
What are the storage requirements for MRO Product 6201413, white? Does this product require storage in a fire cabinet via OSHA or Fire Regulations?
(0) (0)
Answer
Seymour Paint –
It depends on how many cans. The NFPA publishes a guidebook that explains the requirements, please contact your local fire department for a recommendation. Aerosol cans should not be warehoused in subfreezing temperatures or exposed to temperatures above 120F.
(0) (0)
Question
Daniel Hicswa –
Hi are any of these stainless-steel paints available in Qt?
(0) (0)
Answer
Seymour Paint –
We have a 5-gallon pail part number 0-554. Please contact our sales team for more information at sales@seymourpaint.com.
(0) (0)
Question
Donovan Henry –
about to buy gloss white to do my wheels. I’m reading that you dont recommend a clear coat. I was going to use a 2k. Is that still not advisable or needed?
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Donovan Henry –
Doing my wheels with this. Do I need a clearcoat? I was thinking of using a 2k
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Fastenal Company –
is this sunbelt green 0006201437
(0) (0)
Answer
Seymour Paint –
Yes. We just canât call it that because of copyright concerns.
(0) (0)
Question
Rodeo –
Where can I find a list of carriers so that I can shop in person?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for information regarding distributors/stores.
(0) (0)
Question
Beth Holley –
What is the best acryllic latex spray paint to use on galvanized metal?
(0) (0)
Answer
Seymour Paint –
It depends on the project. What are you painting exactly?
(0) (0)
Question
Dustie –
Can u paint a truck with this stuff ?
(0) (0)
Answer
Seymour Paint –
Yes! MRO was specifically designed for metal and wood applications.
(0) (0)
Question
Lisa Taylor –
can you use this on furniture cloth?
(0) (0)
Answer
Seymour Paint –
No. This paint is not intended for fabric.
(0) (0)
Question
Gary Kolenich –
I’m painting Cammo graphics on my RV and it is outside. Would I need to tarp it?
(0) (0)
Answer
Seymour Paint –
No need to cover with a tarp because of our product. It has excellent durability in sunlight and weather.
(0) (0)
Question
Michael –
Can this be used on plastic ( hubcaps)
(0) (0)
Answer
Seymour Paint –
Yes, but only hard type plastics that have been scuffed up and primed.
(0) (0)
Question
Tom L. –
Dose this paint come in a matte or satin finish?
(0) (0)
Answer
Seymour Paint –
Sorry, just high gloss.
(0) (0)
Question
David –
Is there a protective clear that works with the Industrial MRO line?
(0) (0)
Answer
Seymour Paint –
We donât recommend it, but the EN-70 clear in the HiTech line is a compatible formula.
(0) (0)
Question
Tom –
What does SB Green look like and does SB stand for anything?
(0) (0)
Answer
Seymour Paint –
SB stand for SunBelt green, like the forklift company.
(0) (0)
Question
Lane Truett –
Is this a gloss finish
(0) (0)
Answer
Seymour Paint –
Yes, it is high gloss.
(0) (0)
Question
Mark Metzger –
Hi, do you have Edge Red for high heat (300 degrees) for engine shroud. Prefer spray can. It is the color used on C8 Corvette engine sections. Thanks!
(0) (0)
Answer
Seymour Paint –
We donât have edge red, but one of our reds in the MRO or HiTech brands might match. Both brands would have 300F heat resistance.
(0) (0)
Question
Robert Griffin –
Do you sell this paint in a pint or a quart?
(0) (0)
Answer
Seymour Paint –
We only offer in aerosol or gallon part number 1-1423, however depending on your location product may not be available. Please contact our sales team for more information sales@seymourpaint.com or 815-895-9101.
(0) (0)
Question
Robert Griffin –
Do you sell this in half pint or pint?
(0) (0)
Answer
Seymour Paint –
We carry this paint in gallons only (#1-1423).
(0) (0)
Question
Mario nonnenmacher –
Does this paint require a clear coat?
(0) (0)
Answer
Seymour Paint –
No, it does quite well by itself.
(0) (0)
Question
Ken –
Would this be considered a matte orange paint
(0) (0)
Answer
Seymour Paint –
No, itâs high gloss.
(0) (0)
Question
William K Berg –
Is 620-1417 ANSI 49 a water or oil based paint? Can it be used on metal?
(0) (0)
Answer
Seymour Paint –
It is oil based and is excellent for metal.
(0) (0)
Question
julie –
can this be used in a fireplace and good for high heat?
(0) (0)
Answer
Seymour Paint –
It has a 300F continuous heat resistance. Would say probably not the right choice. Please contact our technical support for further assistance 815-895-9101.
(0) (0)
Question
Nathan Welle –
is the MRO oil based acrylic or other
(0) (0)
Answer
Seymour Paint –
620-1453 Tan is an enamel. No acrylic.
(0) (0)
Question
Brian AMES –
the MRO paints can be used on engine blocks?
(0) (0)
Answer
Seymour Paint –
Yes, they have excellent resistance to heat/gas/oil.
(0) (0)
Question
Steve –
Is primer needed on sand blasted metal or can MRO be painted directly to metal? I had some parts painted with your paint and I donât think they used any primer on them.
(0) (0)
Answer
Seymour Paint –
MRO does not need a primer underneath for corrosion resistance. MRO is a direct metal product. However, if you would like the âmaximumâ corrosion resistance, should use the 620-1431 MRO Gray Primer underneath the MRO paint.
(0) (0)
Question
Matt Price –
Is this available in Satin?
(0) (0)
Answer
Seymour Paint –
Sorry, we do not have this available in stain.
(0) (0)
Question
KellieF –
Can this paint be clear coated? If so with what type of clear coat?
(0) (0)
Answer
Seymour Paint –
It can be clear coated ONCE CURED, but normally the clear isnât of the same quality as the MRO so there isnât really a benefit.
(0) (0)
Question
Bob Erdmann –
I used a can of flat black on cast iron and it certainly isnât flat. Does that change with curing? Right now your satin black enamel seems to have less shine.
(0) (0)
Answer
Seymour Paint –
The flat black is not glossier than our stain black enamel. Please contact our quality control department for further assistance 815-895-9101.
(0) (0)
Question
Nick stackhouse –
Do you sell to the us government
(0) (0)
Answer
Seymour Paint –
Please contact our sales team at sales@seymourpaint.com.
(0) (0)
Question
Dennis –
How would it do on a gear shifter with all the shifting?
(0) (0)
Answer
Seymour Paint –
It will work. That said, over time (many months) the oils from our skin will wear it down and youâll need to recoat.
(0) (0)
Question
JD –
Would this work on a cast iron, ceramic coated sink? I intend to lightly sand the sink without removing the ceramic first. If so, would a primer be necessary, or just helpful?
(0) (0)
Answer
Seymour Paint –
Yes, it would work (no primer necessary if youâre scuffing the ceramic coating). That said, this paint wonât be as hard and scratch resistant as a 2 component epoxy or urethane but those are rather expensive. Kind of a tradeoff you could say.
(0) (0)
Question
Robert baker –
Do you have a clear coat to apply over paint ?
(0) (0)
Answer
Seymour Paint –
The 620-1436 should not need a clear coat. The 620-1436 is an enamel spray paint. If you would like to clear coat the 620-1436, would recommend the EN-70 which is also an enamel. Please be very careful in applying the clear coat make sure that you have allowed several days for curing before clear coating so the 620-1436 does not wrinkle. Again, you should not have to clear coat the 620-1436.
(0) (0)
Question
Bruce Whitman –
what is the color code for this yellow? I am looking for Safety Yellow Pantone 109C
(0) (0)
Answer
Seymour Paint –
The 620-1419 looks like either RAL 1018 or Pantone 106C.
(0) (0)
Question
Kevin –
Will this paint adhere to stainless steel?
(0) (0)
Answer
Seymour Paint –
Yes, assuming the stainless steel is free of dirt and grease.
(0) (0)
Question
Darell –
Do you have teal
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not have the color teal.
(0) (0)
Question
Barb Bsldwin –
What paint can i use for a cement dining table please
(0) (0)
Answer
Seymour Paint –
Sorry, we donât make such a product. A water-based enamel would be a better choice for a concrete dining table.
(0) (0)
Question
Richard Seubert –
What paint do I use on a refrigerator?
(0) (0)
Answer
Seymour Paint –
If you are trying to replicate the look of brushed stainless steel, the 98-17 nickel is our closest match. Please contact our technical support for further assistance.
(0) (0)
Question
Andy Manning –
What color matches John Deere green
(0) (0)
Answer
Seymour Paint –
16-268 is the exact match.
(0) (0)
Question
Rick Fox –
I’m looking for a replacement for Krylon’s discontinued 325 Machinery Dark Gray ASA49 spray paint (application is for machinery restoration). Is your 620-1417 comparable with that, and is its sheen semi-gloss or gloss?
(0) (0)
Answer
Seymour Paint –
620-1417 is ASA-49 and has a high gloss finish.
(0) (0)
Question
Frank Smith –
Can this be used on a stainless steel bathtub?
(0) (0)
Answer
Seymour Paint –
It is not recommended for immersion in water.
(0) (0)
Question
Ryan –
Is this an enamel or lacquer based primer? Wondering about top coat of other automotive paints.
(0) (0)
Answer
Seymour Paint –
It is an enamel base.
(0) (0)
Question
Oz –
Is this UV stable? I’m looking to paint some vents that’ll be on the top of my hood on my jeep and hoping to avoid fading. Is this a good option or should I pick something else?
(0) (0)
Answer
Seymour Paint –
Yes, this paint has good resistance to UV light.
(0) (0)
Question
Vini –
Is this “Seymour MRO Industrial High-Solids Spray Paint, SJ Orange” the same orange as Skyjack orange?
(0) (0)
Answer
Seymour Paint –
Yes, it is.
(0) (0)
Question
Jose –
Can you spray on 2k clear coat this paint ?
(0) (0)
Answer
Seymour Paint –
No
(0) (0)
Question
Robert –
Do you have a swatch of each color that I could keep at my sign shop? Sometimes you need the perfect color.
(0) (0)
Answer
Seymour Paint –
Sorry, we donât have swatches available.
(0) (0)